Free martini SVG

Vodka martini with a lemon twist SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Vodka martini with a lemon twist, as a solid black shape
Vodka martini with a lemon twist. The preview is the SVG file itself.

A fuller glass with no olive: a ribbon of lemon peel hooks over the rim and hangs down the outside in two and a half curls. The peel is welded to the rim.

What is in the file

Size71 × 100 mm (2.79 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length615 mm at this size
Narrowest part2.8 mm at this size
Nodes83 curve and line segments

Measured from the file. PNG: 1,440 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.71 mm156 mm130Fine detail: vinyl and paper only, weed with care
1.42 × 2 in (36 × 51 mm)1.4 mm312 mm35Vinyl, card and thin sheet
2.13 × 3 in (54 × 76 mm)2.1 mm469 mm15Vinyl, card and thin sheet
2.84 × 4 in (72 × 102 mm)2.8 mm625 mm8Vinyl, card and thin sheet
4.25 × 6 in (108 × 152 mm)4.3 mm937 mm2Any material, including 3 mm wood and acrylic
5.67 × 8 in (144 × 203 mm)5.7 mm1,250 mm2Any material, including 3 mm wood and acrylic
8.51 × 12 in (216 × 305 mm)8.5 mm1,875 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More martini SVG files

← Martini glass and a high heel All 17 martinis Dirty martini with three olives →