Free magnolia SVG

Paper magnolia template SVG

Paper magnolia template, as a solid black shape
Paper magnolia template. The preview is the SVG file itself.

Loose pieces: three large, three middle and three small tepals, a fringed strip to roll into the cone and two leaves. Cup each tepal over a spoon and glue them round the rolled centre, small ones first.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 69 mm (3.94 × 2.71 in), scales to any size
Pieces11 separate pieces
Outlines to cut14: 11 outer edges and 3 cut-outs
Cut length879 mm at this size
Narrowest part1.7 mm at this size
Nodes177 curve and line segments

Measured from the file. PNG: 2,000 × 1,402 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 18 mm)0.43 mm223 mm130Too fine for most machines
2 × 1.38 in (51 × 35 mm)0.86 mm447 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.07 in (76 × 53 mm)1.3 mm670 mm15Vinyl, card and thin sheet
4 × 2.76 in (102 × 70 mm)1.7 mm893 mm8Vinyl, card and thin sheet
6 × 4.13 in (152 × 105 mm)2.6 mm1,340 mm2Vinyl, card and thin sheet
8 × 5.51 in (203 × 140 mm)3.5 mm1,786 mm2Any material, including 3 mm wood and acrylic
12 × 8.27 in (305 × 210 mm)5.2 mm2,679 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More magnolia SVG files

← Magnolia leaves, a sprig of three All 15 magnolias Layered magnolia in five colours →