Free lineman SVG

Lineman outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lineman outline, drawn as a line
Lineman outline. The preview is the SVG file itself.

The climber on the pole as an even line: hat, head, arms, belt, body, legs and boots, with the crossarm and its five insulators above. For colouring pages, engraving and pen plotters.

What is in the file

Size63 × 100 mm (2.47 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,380 mm at this size
Narrowest part1.9 mm at this size
Nodes546 curve and line segments

Measured from the file. PNG: 1,285 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.63 × 1 in (16 × 25 mm)0.48 mm351 mm140Too fine for most machines
1.26 × 2 in (32 × 51 mm)0.97 mm701 mm40Fine detail: vinyl and paper only, weed with care
1.88 × 3 in (48 × 76 mm)1.4 mm1,052 mm15Vinyl, card and thin sheet
2.51 × 4 in (64 × 102 mm)1.9 mm1,402 mm8Vinyl, card and thin sheet
3.77 × 6 in (96 × 152 mm)2.9 mm2,103 mm3Vinyl, card and thin sheet
5.02 × 8 in (128 × 203 mm)3.9 mm2,804 mm2Any material, including 3 mm wood and acrylic
7.54 × 12 in (191 × 305 mm)5.8 mm4,206 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lineman SVG files

← Lineman monogram frame between two poles All 13 linemen Layered lineman in seven colours →