Free lineman SVG

Lineman hard hat with a bolt SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lineman hard hat with a bolt, as a solid black shape
Lineman hard hat with a bolt. The preview is the SVG file itself.

A full-brim hard hat from the side, the kind worn on line crews: a ridge over the top, two ribs, a band line above the brim and a small lightning bolt cut into the shell.

What is in the file

Size100 × 55 mm (3.94 × 2.17 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length609 mm at this size
Narrowest part1 mm at this size
Nodes72 curve and line segments

Measured from the file. PNG: 2,000 × 1,138 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.25 mm155 mm160Too fine for most machines
2 × 1.1 in (51 × 28 mm)0.51 mm309 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.66 in (76 × 42 mm)0.76 mm464 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.21 in (102 × 56 mm)1 mm619 mm10Vinyl, card and thin sheet
6 × 3.31 in (152 × 84 mm)1.5 mm928 mm3Vinyl, card and thin sheet
8 × 4.42 in (203 × 112 mm)2 mm1,237 mm2Vinyl, card and thin sheet
12 × 6.62 in (305 × 168 mm)3 mm1,856 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lineman SVG files

← Lineman bucket truck All 13 linemen Lineman climbing hooks →