Free lineman SVG

Lineman climbing a pole SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lineman climbing a pole, as a solid black shape
Lineman climbing a pole. The preview is the SVG file itself.

A lineman in a full-brim hard hat leaning back in the belt, both feet braced on a wooden pole and both hands at work on it. Above, a crossarm with two braces and five pin insulators.

What is in the file

Size64 × 100 mm (2.54 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length765 mm at this size
Narrowest part2.3 mm at this size
Nodes227 curve and line segments

Measured from the file. PNG: 1,315 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.64 × 1 in (16 × 25 mm)0.58 mm194 mm140Fine detail: vinyl and paper only, weed with care
1.29 × 2 in (33 × 51 mm)1.2 mm389 mm40Vinyl, card and thin sheet
1.93 × 3 in (49 × 76 mm)1.8 mm583 mm15Vinyl, card and thin sheet
2.58 × 4 in (65 × 102 mm)2.3 mm777 mm8Vinyl, card and thin sheet
3.86 × 6 in (98 × 152 mm)3.5 mm1,166 mm3Any material, including 3 mm wood and acrylic
5.15 × 8 in (131 × 203 mm)4.7 mm1,554 mm2Any material, including 3 mm wood and acrylic
7.73 × 12 in (196 × 305 mm)7 mm2,332 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lineman SVG files

← Layered lineman in seven colours All 13 linemen Lineman working on a pole top →