Free letter W SVG

Letter W in UnifrakturMaguntia SVG

Letter W in UnifrakturMaguntia, as a solid black shape — Letter W in UnifrakturMaguntia. The preview is the SVG file itself.

The capital W of UnifrakturMaguntia, a blackletter, as one welded shape 100 mm tall. It has 2 closed counters, cut as holes in the letter. The hairlines are thickened a little so that they survive cutting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 71 mm (3.94 × 2.79 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	756 mm at this size
Narrowest part	2.4 mm at this size
Nodes	150 curve and line segments

Measured from the file. PNG: 2,000 × 1,438 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.71 in (25 × 18 mm)	0.61 mm	192 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.42 in (51 × 36 mm)	1.2 mm	384 mm	35	Vinyl, card and thin sheet
3 × 2.12 in (76 × 54 mm)	1.8 mm	576 mm	15	Vinyl, card and thin sheet
4 × 2.83 in (102 × 72 mm)	2.4 mm	768 mm	8	Vinyl, card and thin sheet
6 × 4.25 in (152 × 108 mm)	3.7 mm	1,152 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.66 in (203 × 144 mm)	4.9 mm	1,536 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.5 in (305 × 216 mm)	7.3 mm	2,304 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter W SVG files

← Letter W in Rye All 18 letter W designs Letter W in Lilita One →