Free letter W SVG

Letter W outline SVG

Letter W outline, drawn as a line — Letter W outline. The preview is the SVG file itself.

The block W as an outline 2.4 mm wide, hollow inside. For colouring, for foil and pen work, or to layer over the solid letter in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 66 mm (3.94 × 2.61 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	969 mm at this size
Narrowest part	1.3 mm at this size
Nodes	67 curve and line segments

Measured from the file. PNG: 2,000 × 1,352 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.66 in (25 × 17 mm)	0.33 mm	246 mm	140	Too fine for most machines
2 × 1.33 in (51 × 34 mm)	0.66 mm	492 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 1.99 in (76 × 51 mm)	0.99 mm	738 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.65 in (102 × 67 mm)	1.3 mm	985 mm	8	Vinyl, card and thin sheet
6 × 3.98 in (152 × 101 mm)	2 mm	1,477 mm	2	Vinyl, card and thin sheet
8 × 5.3 in (203 × 135 mm)	2.6 mm	1,969 mm	2	Vinyl, card and thin sheet
12 × 7.96 in (305 × 202 mm)	4 mm	2,954 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter W SVG files

← Letter W stencil plate All 18 letter W designs Polka dot letter W →