Free letter W SVG

Polka dot letter W SVG

Polka dot letter W, as a solid black shape — Polka dot letter W. The preview is the SVG file itself.

A chunky W with round holes punched through it in a staggered grid. Every dot sits fully inside the letter, so the edge stays clean and the letter stays in one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 78 mm (3.94 × 3.05 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	70: 1 outer edge and 69 cut-outs
Cut length	1,365 mm at this size
Narrowest part	3.4 mm at this size
Nodes	308 curve and line segments

Measured from the file. PNG: 2,000 × 1,567 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.78 in (25 × 20 mm)	0.86 mm	347 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.55 in (51 × 39 mm)	1.7 mm	693 mm	30	Vinyl, card and thin sheet
3 × 2.32 in (76 × 59 mm)	2.6 mm	1,040 mm	12	Vinyl, card and thin sheet
4 × 3.1 in (102 × 79 mm)	3.5 mm	1,387 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.65 in (152 × 118 mm)	5.2 mm	2,080 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.2 in (203 × 157 mm)	6.9 mm	2,774 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.3 in (305 × 236 mm)	10 mm	4,161 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter W SVG files

← Letter W outline All 18 letter W designs Letter W in a laurel wreath →