Free letter W SVG

Split letter W for a name SVG

Split letter W for a name, as a solid black shape — Split letter W for a name. The preview is the SVG file itself.

A serif W cut in two across the middle, with a ruled gap 16 mm tall for a name or a date in your own lettering. Two pieces, each closed off by its rule: the top half and the bottom half.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 63 mm (3.94 × 2.48 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	5: 2 outer edges and 3 cut-outs
Cut length	731 mm at this size
Narrowest part	1.4 mm at this size
Nodes	72 curve and line segments

Measured from the file. PNG: 2,000 × 1,290 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.63 in (25 × 16 mm)	0.36 mm	186 mm	140	Too fine for most machines
2 × 1.26 in (51 × 32 mm)	0.71 mm	371 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.89 in (76 × 48 mm)	1.1 mm	557 mm	15	Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)	1.4 mm	743 mm	8	Vinyl, card and thin sheet
6 × 3.79 in (152 × 96 mm)	2.1 mm	1,114 mm	3	Vinyl, card and thin sheet
8 × 5.05 in (203 × 128 mm)	2.8 mm	1,485 mm	2	Vinyl, card and thin sheet
12 × 7.57 in (305 × 192 mm)	4.3 mm	2,228 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter W SVG files

← Letter W cut from a disc All 18 letter W designs Letter W cut from a heart →