Free lake SVG

Loon on a lake SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Loon on a lake, as a solid black shape
Loon on a lake. The preview is the SVG file itself.

A loon swimming to the right, low in the water, with its dagger bill level. The three stripes on its neck, the eye and the rows of square spots on its back are cut out, and it sits on a band of water with two ripples.

What is in the file

Size100 × 50 mm (3.94 × 1.95 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut30: 1 outer edge and 29 cut-outs
Cut length711 mm at this size
Narrowest part1.8 mm at this size
Nodes223 curve and line segments

Measured from the file. PNG: 2,000 × 1,031 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.46 mm181 mm170Too fine for most machines
2 × 0.99 in (51 × 25 mm)0.91 mm361 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.49 in (76 × 38 mm)1.4 mm542 mm21Vinyl, card and thin sheet
4 × 1.98 in (102 × 50 mm)1.8 mm722 mm10Vinyl, card and thin sheet
6 × 2.98 in (152 × 76 mm)2.7 mm1,084 mm3Vinyl, card and thin sheet
8 × 3.97 in (203 × 101 mm)3.7 mm1,445 mm2Any material, including 3 mm wood and acrylic
12 × 5.95 in (305 × 151 mm)5.5 mm2,167 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lake SVG files

← Lake house with a jetty All 13 lakes Lake sunset in a circle →