Free lake SVG

Two chairs on a lake shore SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two chairs on a lake shore, as a solid black shape
Two chairs on a lake shore. The preview is the SVG file itself.

Two slatted wooden chairs face each other on a grassy bank, with the lake behind them: one long wavy line and four short ones for the water, a far shore with pines and a sun with seven rays.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,617 mm at this size
Narrowest part1.8 mm at this size
Nodes236 curve and line segments

Measured from the file. PNG: 2,000 × 1,462 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.46 mm411 mm130Too fine for most machines
2 × 1.44 in (51 × 37 mm)0.91 mm821 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.16 in (76 × 55 mm)1.4 mm1,232 mm15Vinyl, card and thin sheet
4 × 2.88 in (102 × 73 mm)1.8 mm1,643 mm6Vinyl, card and thin sheet
6 × 4.32 in (152 × 110 mm)2.7 mm2,464 mm2Vinyl, card and thin sheet
8 × 5.76 in (203 × 146 mm)3.7 mm3,286 mm2Any material, including 3 mm wood and acrylic
12 × 8.64 in (305 × 219 mm)5.5 mm4,929 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lake SVG files

← Lake sunset in a circle All 13 lakes Lake with a rowing boat between two pines →