Free lake SVG

Lake house with a jetty SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Lake house with a jetty, as a solid black shape
Lake house with a jetty. The preview is the SVG file itself.

A gabled house with a chimney, a round attic window and a low wing, on a bank above the water. A tall pine stands beside it and a short jetty on two posts runs out over the lake, which has four ripples cut in it.

What is in the file

Size100 × 59 mm (3.94 × 2.31 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length926 mm at this size
Narrowest part2.2 mm at this size
Nodes125 curve and line segments

Measured from the file. PNG: 2,000 × 1,204 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.56 mm235 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.17 in (51 × 30 mm)1.1 mm470 mm40Vinyl, card and thin sheet
3 × 1.76 in (76 × 45 mm)1.7 mm706 mm18Vinyl, card and thin sheet
4 × 2.34 in (102 × 60 mm)2.2 mm941 mm8Vinyl, card and thin sheet
6 × 3.52 in (152 × 89 mm)3.4 mm1,411 mm3Any material, including 3 mm wood and acrylic
8 × 4.69 in (203 × 119 mm)4.5 mm1,882 mm2Any material, including 3 mm wood and acrylic
12 × 7.03 in (305 × 179 mm)6.7 mm2,822 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More lake SVG files

← Lake dock with posts All 13 lakes Loon on a lake →