Free King and Queen SVG

King and Queen stencil plate SVG

King and Queen stencil plate, as a solid black shape — King and Queen stencil plate. The preview is the SVG file itself.

A rounded plate with “KING AND QUEEN” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 77 mm (3.94 × 3.01 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	1,431 mm at this size
Narrowest part	1.7 mm at this size
Nodes	265 curve and line segments

Measured from the file. PNG: 2,000 × 1,548 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.77 in (25 × 19 mm)	0.43 mm	363 mm	120	Too fine for most machines
2 × 1.53 in (51 × 39 mm)	0.86 mm	727 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.3 in (76 × 58 mm)	1.3 mm	1,090 mm	12	Vinyl, card and thin sheet
4 × 3.06 in (102 × 78 mm)	1.7 mm	1,454 mm	6	Vinyl, card and thin sheet
6 × 4.59 in (152 × 117 mm)	2.6 mm	2,181 mm	2	Vinyl, card and thin sheet
8 × 6.12 in (203 × 155 mm)	3.5 mm	2,908 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.18 in (305 × 233 mm)	5.2 mm	4,362 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More King and Queen SVG files

← King and Queen outline lettering All 12 King and Queen designs King and Queen with a drop shadow →