Free King and Queen SVG

King and Queen in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

King and Queen in Pacifico, as a solid black shape
King and Queen in Pacifico. The preview is the SVG file itself.

“King and Queen” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 65 mm (3.94 × 2.55 in), scales to any size
Pieces5 separate pieces
Outlines to cut13: 5 outer edges and 8 cut-outs
Cut length879 mm at this size
Narrowest part1.4 mm at this size
Nodes327 curve and line segments

Measured from the file. PNG: 2,000 × 1,321 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.36 mm223 mm140Too fine for most machines
2 × 1.29 in (51 × 33 mm)0.71 mm447 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)1.1 mm670 mm15Vinyl, card and thin sheet
4 × 2.59 in (102 × 66 mm)1.4 mm893 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 99 mm)2.1 mm1,340 mm2Vinyl, card and thin sheet
8 × 5.18 in (203 × 131 mm)2.8 mm1,786 mm2Vinyl, card and thin sheet
12 × 7.76 in (305 × 197 mm)4.3 mm2,679 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More King and Queen SVG files

← King and Queen with a crown All 13 King and Queen designs King and Queen in Lobster →