Free King and Queen SVG

King and Queen in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

King and Queen in Amatic SC, as a solid black shape
King and Queen in Amatic SC. The preview is the SVG file itself.

“King and Queen” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 70 mm (3.94 × 2.74 in), scales to any size
Pieces12 separate pieces
Outlines to cut15: 12 outer edges and 3 cut-outs
Cut length1,242 mm at this size
Narrowest part1.2 mm at this size
Nodes420 curve and line segments

Measured from the file. PNG: 2,000 × 1,413 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)0.3 mm315 mm130Too fine for most machines
2 × 1.39 in (51 × 35 mm)0.61 mm631 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.09 in (76 × 53 mm)0.91 mm946 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.78 in (102 × 71 mm)1.2 mm1,262 mm8Vinyl, card and thin sheet
6 × 4.17 in (152 × 106 mm)1.8 mm1,893 mm2Vinyl, card and thin sheet
8 × 5.56 in (203 × 141 mm)2.4 mm2,524 mm2Vinyl, card and thin sheet
12 × 8.34 in (305 × 212 mm)3.7 mm3,786 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More King and Queen SVG files

← King and Queen in Alfa Slab One All 13 King and Queen designs King and Queen in block capitals →