Free King and Queen SVG

King and Queen outline lettering SVG

King and Queen outline lettering, drawn as a line
King and Queen outline lettering. The preview is the SVG file itself.

“King and Queen” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 41 mm (3.94 × 1.63 in), scales to any size
Pieces14 separate pieces
Outlines to cut39: 14 outer edges and 25 cut-outs
Cut length1,124 mm at this size
Narrowest part1.3 mm at this size
Nodes404 curve and line segments

Measured from the file. PNG: 2,000 × 873 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 11 mm)0.33 mm285 mm190Too fine for most machines
2 × 0.83 in (51 × 21 mm)0.66 mm571 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.24 in (76 × 32 mm)0.99 mm856 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.66 in (102 × 42 mm)1.3 mm1,142 mm12Vinyl, card and thin sheet
6 × 2.48 in (152 × 63 mm)2 mm1,713 mm4Vinyl, card and thin sheet
8 × 3.31 in (203 × 84 mm)2.6 mm2,284 mm3Vinyl, card and thin sheet
12 × 4.97 in (305 × 126 mm)4 mm3,426 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More King and Queen SVG files

← King and Queen with stars All 12 King and Queen designs King and Queen stencil plate →