Free key SVG

Two crossed keys SVG

Two crossed keys, as a solid black shape
Two crossed keys. The preview is the SVG file itself.

Two old keys crossed with their bows at the top, one with a ring bow and one with a clover bow, welded where the stems meet. An emblem for a guest house, a locksmith or a new home.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size90 × 100 mm (3.53 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length873 mm at this size
Narrowest part5 mm at this size
Nodes127 curve and line segments

Measured from the file. PNG: 1,802 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.9 × 1 in (23 × 25 mm)1.3 mm222 mm110Vinyl, card and thin sheet
1.79 × 2 in (46 × 51 mm)2.5 mm443 mm30Vinyl, card and thin sheet
2.69 × 3 in (68 × 76 mm)3.8 mm665 mm12Any material, including 3 mm wood and acrylic
3.59 × 4 in (91 × 102 mm)5.1 mm887 mm6Any material, including 3 mm wood and acrylic
5.38 × 6 in (137 × 152 mm)7.6 mm1,330 mm2Any material, including 3 mm wood and acrylic
7.18 × 8 in (182 × 203 mm)10 mm1,774 mm1Any material, including 3 mm wood and acrylic
10.76 × 12 in (273 × 305 mm)15 mm2,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More key SVG files

← Keyhole plate for a key All 15 keys Bunch of keys on a ring →