Free key SVG

Skeleton key outline SVG

Skeleton key outline, drawn as a line
Skeleton key outline. The preview is the SVG file itself.

A fat old key drawn as a single line, open inside, with a round bow and a small eyelet at the top of it. For colouring pages, foil and pen plotters, and for engraving a name along the stem.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size89 × 100 mm (3.52 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length786 mm at this size
Narrowest part2 mm at this size
Nodes104 curve and line segments

Measured from the file. PNG: 1,794 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.51 mm200 mm110Fine detail: vinyl and paper only, weed with care
1.79 × 2 in (45 × 51 mm)1 mm399 mm30Vinyl, card and thin sheet
2.68 × 3 in (68 × 76 mm)1.5 mm599 mm12Vinyl, card and thin sheet
3.57 × 4 in (91 × 102 mm)2 mm799 mm6Vinyl, card and thin sheet
5.36 × 6 in (136 × 152 mm)3 mm1,198 mm2Any material, including 3 mm wood and acrylic
7.14 × 8 in (181 × 203 mm)4.1 mm1,597 mm1Any material, including 3 mm wood and acrylic
10.72 × 12 in (272 × 305 mm)6.1 mm2,396 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More key SVG files

← New home key with a house All 15 keys Key monogram with a blank disc →