Free key SVG

Key to my heart SVG

Key to my heart, as a solid black shape — Key to my heart. The preview is the SVG file itself.

A key whose bow is an open heart, with two collars below it and a bit of three teeth. For Valentine cards, wedding favours and anniversary gifts.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	40 × 100 mm (1.56 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	422 mm at this size
Narrowest part	2.6 mm at this size
Nodes	65 curve and line segments

Measured from the file. PNG: 837 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.4 × 1 in (10 × 25 mm)	0.66 mm	107 mm	200	Fine detail: vinyl and paper only, weed with care
0.79 × 2 in (20 × 51 mm)	1.3 mm	214 mm	60	Vinyl, card and thin sheet
1.18 × 3 in (30 × 76 mm)	2 mm	322 mm	24	Vinyl, card and thin sheet
1.58 × 4 in (40 × 102 mm)	2.6 mm	429 mm	12	Vinyl, card and thin sheet
2.37 × 6 in (60 × 152 mm)	4 mm	643 mm	4	Any material, including 3 mm wood and acrylic
3.16 × 8 in (80 × 203 mm)	5.3 mm	858 mm	3	Any material, including 3 mm wood and acrylic
4.74 × 12 in (120 × 305 mm)	7.9 mm	1,286 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More key SVG files

← Antique key with a four ring bow All 15 keys Santa’s magic key →