Key monogram with a blank disc SVG
An old key with a solid round disc for a bow, left blank for an initial, with a small hole at the top to hang it by. Cut the letter out of the disc or lay it on top.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 46 × 100 mm (1.82 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 342 mm at this size |
| Narrowest part | 5.7 mm at this size |
| Nodes | 46 curve and line segments |
Measured from the file. PNG: 965 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.46 × 1 in (12 × 25 mm) | 1.4 mm | 87 mm | 180 | Vinyl, card and thin sheet |
| 0.92 × 2 in (23 × 51 mm) | 2.9 mm | 174 mm | 50 | Vinyl, card and thin sheet |
| 1.39 × 3 in (35 × 76 mm) | 4.3 mm | 261 mm | 21 | Any material, including 3 mm wood and acrylic |
| 1.85 × 4 in (47 × 102 mm) | 5.8 mm | 347 mm | 10 | Any material, including 3 mm wood and acrylic |
| 2.77 × 6 in (70 × 152 mm) | 8.7 mm | 521 mm | 4 | Any material, including 3 mm wood and acrylic |
| 3.7 × 8 in (94 × 203 mm) | 12 mm | 695 mm | 3 | Any material, including 3 mm wood and acrylic |
| 5.54 × 12 in (141 × 305 mm) | 17 mm | 1,042 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Car key with a fob 
Skeleton key 
Old key with a ring bow 
Antique key with a four ring bow 
Key to my heart 
Santa’s magic key 
House key 
Simple key icon 