Free Jesus SVG

Jesus stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jesus stencil plate, as a solid black shape
Jesus stencil plate. The preview is the SVG file itself.

A rounded plate with “JESUS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 45 mm (3.94 × 1.76 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length803 mm at this size
Narrowest part3.7 mm at this size
Nodes120 curve and line segments

Measured from the file. PNG: 2,000 × 938 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.45 in (25 × 11 mm)0.94 mm204 mm180Fine detail: vinyl and paper only, weed with care
2 × 0.9 in (51 × 23 mm)1.9 mm408 mm55Vinyl, card and thin sheet
3 × 1.34 in (76 × 34 mm)2.8 mm612 mm21Vinyl, card and thin sheet
4 × 1.79 in (102 × 46 mm)3.8 mm816 mm12Any material, including 3 mm wood and acrylic
6 × 2.69 in (152 × 68 mm)5.6 mm1,224 mm4Any material, including 3 mm wood and acrylic
8 × 3.58 in (203 × 91 mm)7.5 mm1,632 mm3Any material, including 3 mm wood and acrylic
12 × 5.38 in (305 × 137 mm)11 mm2,448 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus SVG files

← Jesus outline lettering All 13 Jesus designs Jesus with a drop shadow →