Free Jesus SVG

Jesus in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Jesus in Alfa Slab One, as a solid black shape
Jesus in Alfa Slab One. The preview is the SVG file itself.

“Jesus” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 27 mm (3.94 × 1.06 in), scales to any size
Pieces5 separate pieces
Outlines to cut6: 5 outer edges and 1 cut-out
Cut length506 mm at this size
Narrowest part3.6 mm at this size
Nodes101 curve and line segments

Measured from the file. PNG: 2,000 × 592 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.27 in (25 × 7 mm)0.91 mm129 mm260Fine detail: vinyl and paper only, weed with care
2 × 0.54 in (51 × 14 mm)1.8 mm257 mm80Vinyl, card and thin sheet
3 × 0.8 in (76 × 20 mm)2.7 mm386 mm36Vinyl, card and thin sheet
4 × 1.07 in (102 × 27 mm)3.7 mm514 mm18Any material, including 3 mm wood and acrylic
6 × 1.61 in (152 × 41 mm)5.5 mm771 mm6Any material, including 3 mm wood and acrylic
8 × 2.14 in (203 × 54 mm)7.3 mm1,028 mm5Any material, including 3 mm wood and acrylic
12 × 3.22 in (305 × 82 mm)11 mm1,542 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Jesus SVG files

← Jesus in Lilita One All 13 Jesus designs Jesus in Amatic SC →