Free jellyfish SVG

Three jellyfish drifting SVG

Three jellyfish drifting, as a solid black shape — Three jellyfish drifting. The preview is the SVG file itself.

A big jellyfish with a middle-sized and a small one drifting below it, each tucked against the tentacles of the one above, so the three cut as a single piece. For bathroom walls and beach bags.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	77 × 100 mm (3.04 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	39: 1 outer edge and 38 cut-outs
Cut length	1,441 mm at this size
Narrowest part	1.7 mm at this size
Nodes	777 curve and line segments

Measured from the file. PNG: 1,563 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.77 × 1 in (20 × 25 mm)	0.43 mm	366 mm	120	Too fine for most machines
1.55 × 2 in (39 × 51 mm)	0.86 mm	732 mm	30	Fine detail: vinyl and paper only, weed with care
2.32 × 3 in (59 × 76 mm)	1.3 mm	1,098 mm	12	Vinyl, card and thin sheet
3.09 × 4 in (79 × 102 mm)	1.7 mm	1,464 mm	6	Vinyl, card and thin sheet
4.64 × 6 in (118 × 152 mm)	2.6 mm	2,196 mm	2	Vinyl, card and thin sheet
6.18 × 8 in (157 × 203 mm)	3.5 mm	2,928 mm	1	Any material, including 3 mm wood and acrylic
9.28 × 12 in (236 × 305 mm)	5.2 mm	4,392 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More jellyfish SVG files

← Mandala jellyfish All 12 jellyfish Jellyfish with long tentacles →