Free jellyfish SVG

Jellyfish outline SVG

Jellyfish outline, drawn as a line
Jellyfish outline. The preview is the SVG file itself.

The classic jellyfish as a line drawing: the bell as an open dome with a rim line, and every arm and tentacle as a single wavy line hanging from it. For colouring pages, foil, engraving and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size76 × 100 mm (3.01 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,370 mm at this size
Narrowest part2.1 mm at this size
Nodes451 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,546 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)0.53 mm348 mm120Fine detail: vinyl and paper only, weed with care
1.53 × 2 in (39 × 51 mm)1.1 mm696 mm35Vinyl, card and thin sheet
2.29 × 3 in (58 × 76 mm)1.6 mm1,044 mm12Vinyl, card and thin sheet
3.06 × 4 in (78 × 102 mm)2.1 mm1,392 mm6Vinyl, card and thin sheet
4.58 × 6 in (116 × 152 mm)3.2 mm2,088 mm2Any material, including 3 mm wood and acrylic
6.11 × 8 in (155 × 203 mm)4.3 mm2,784 mm1Any material, including 3 mm wood and acrylic
9.17 × 12 in (233 × 305 mm)6.4 mm4,176 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More jellyfish SVG files

← Moon jellyfish from above All 12 jellyfish Layered jellyfish in three colours →