Free jellyfish SVG

Layered jellyfish in three colours SVG

Layered jellyfish in three colours, in layered colours
Layered jellyfish in three colours. The preview is the SVG file itself.

Three layers to stack: a violet jellyfish, a pink bell to lay over the top of it, and pale ribs with a rim line for the bell. Glow-in-the-dark vinyl works well for the top layer.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size80 × 100 mm (3.16 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length1,226 mm at this size
Narrowest part2.4 mm at this size
Nodes422 curve and line segments
Layers3: tentacles, bell and ribs

Measured from the file. PNG: 1,619 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.61 mm311 mm120Fine detail: vinyl and paper only, weed with care
1.6 × 2 in (41 × 51 mm)1.2 mm623 mm30Vinyl, card and thin sheet
2.41 × 3 in (61 × 76 mm)1.8 mm934 mm12Vinyl, card and thin sheet
3.21 × 4 in (81 × 102 mm)2.4 mm1,246 mm6Vinyl, card and thin sheet
4.81 × 6 in (122 × 152 mm)3.7 mm1,868 mm2Any material, including 3 mm wood and acrylic
6.42 × 8 in (163 × 203 mm)4.9 mm2,491 mm1Any material, including 3 mm wood and acrylic
9.62 × 12 in (244 × 305 mm)7.3 mm3,737 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More jellyfish SVG files

← Jellyfish outline All 12 jellyfish Jellyfish with frilled arms →