It’s a Father Figure in Pacifico SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“It’s Not a Dad Bod It’s a Father Figure” set in Pacifico, a bold brush script, on 3 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.
What is in the file
| Size | 100 × 73 mm (3.94 × 2.88 in), scales to any size |
|---|---|
| Pieces | 20 separate pieces |
| Outlines to cut | 40: 20 outer edges and 20 cut-outs |
| Cut length | 1,481 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 922 curve and line segments |
Measured from the file. PNG: 2,000 × 1,483 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.73 in (25 × 19 mm) | 0.3 mm | 376 mm | 130 | Too fine for most machines |
| 2 × 1.46 in (51 × 37 mm) | 0.61 mm | 752 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.19 in (76 × 56 mm) | 0.91 mm | 1,129 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.92 in (102 × 74 mm) | 1.2 mm | 1,505 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.39 in (152 × 111 mm) | 1.8 mm | 2,257 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.85 in (203 × 149 mm) | 2.4 mm | 3,009 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.77 in (305 × 223 mm) | 3.7 mm | 4,514 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More It’s Not a Dad Bod It’s a Father Figure SVG files
-
It’s a Father Figure in Lobster Solid · 21 pieces -
It’s a Father Figure in Lilita One Solid · 32 pieces -
It’s a Father Figure in Amatic SC Solid · 31 pieces -
It’s a Father Figure in block capitals Solid · 31 pieces -
It’s a Father Figure in script and capitals Solid · 29 pieces -
It’s a Father Figure with stars Solid · 27 pieces -
It’s a Father Figure outline lettering Outline · 35 pieces -
It’s a Father Figure stencil plate Solid · one piece
← It’s a Father Figure with a drop shadow All 10 It’s Not a Dad Bod It’s a Father Figure designs It’s a Father Figure in Lobster →