It’s a Father Figure in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“It’s Not a Dad Bod It’s a Father Figure” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 52 mm (3.94 × 2.04 in), scales to any size |
|---|---|
| Pieces | 32 separate pieces |
| Outlines to cut | 46: 32 outer edges and 14 cut-outs |
| Cut length | 1,171 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 493 curve and line segments |
Measured from the file. PNG: 2,000 × 1,071 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.52 in (25 × 13 mm) | 0.46 mm | 297 mm | 170 | Too fine for most machines |
| 2 × 1.03 in (51 × 26 mm) | 0.91 mm | 595 mm | 45 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.55 in (76 × 39 mm) | 1.4 mm | 892 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.07 in (102 × 53 mm) | 1.8 mm | 1,190 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.1 in (152 × 79 mm) | 2.7 mm | 1,785 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.14 in (203 × 105 mm) | 3.7 mm | 2,379 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.2 in (305 × 158 mm) | 5.5 mm | 3,569 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More It’s Not a Dad Bod It’s a Father Figure SVG files
-
It’s a Father Figure in Amatic SC Solid · 31 pieces
-
It’s a Father Figure in block capitals Solid · 31 pieces
-
It’s a Father Figure in script and capitals Solid · 29 pieces
-
It’s a Father Figure with stars Solid · 27 pieces
-
It’s a Father Figure outline lettering Outline · 32 pieces
-
It’s a Father Figure stencil plate Solid · one piece
-
It’s a Father Figure with a drop shadow Layered · 25 pieces
-
It’s a Father Figure with a handlebar moustache Solid · 30 pieces
← It’s a Father Figure in Lobster All 11 It’s Not a Dad Bod It’s a Father Figure designs It’s a Father Figure in Amatic SC →