It’s a Father Figure outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“It’s Not a Dad Bod It’s a Father Figure” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.91 in), scales to any size |
|---|---|
| Pieces | 35 separate pieces |
| Outlines to cut | 94: 35 outer edges and 59 cut-outs |
| Cut length | 1,785 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 807 curve and line segments |
Measured from the file. PNG: 2,000 × 1,012 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 12 mm) | 0.25 mm | 453 mm | 170 | Too fine for most machines |
| 2 × 0.97 in (51 × 25 mm) | 0.51 mm | 907 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.46 in (76 × 37 mm) | 0.76 mm | 1,360 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.94 in (102 × 49 mm) | 1 mm | 1,814 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.92 in (152 × 74 mm) | 1.5 mm | 2,720 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.89 in (203 × 99 mm) | 2 mm | 3,627 mm | 2 | Vinyl, card and thin sheet |
| 12 × 5.83 in (305 × 148 mm) | 3 mm | 5,441 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More It’s Not a Dad Bod It’s a Father Figure SVG files
-
It’s a Father Figure stencil plate Solid · one piece -
It’s a Father Figure with a drop shadow Layered · 25 pieces -
It’s a Father Figure in Pacifico Solid · 20 pieces -
It’s a Father Figure in Lobster Solid · 21 pieces -
It’s a Father Figure in Lilita One Solid · 32 pieces -
It’s a Father Figure in Amatic SC Solid · 31 pieces -
It’s a Father Figure in block capitals Solid · 31 pieces -
It’s a Father Figure in script and capitals Solid · 29 pieces
← It’s a Father Figure with stars All 10 It’s Not a Dad Bod It’s a Father Figure designs It’s a Father Figure stencil plate →