It’s a Father Figure in Lobster SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“It’s Not a Dad Bod It’s a Father Figure” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.62 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 35: 21 outer edges and 14 cut-outs |
| Cut length | 1,438 mm at this size |
| Narrowest part | 0.9 mm at this size |
| Nodes | 825 curve and line segments |
Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.23 mm | 365 mm | 140 | Too fine for most machines |
| 2 × 1.33 in (51 × 34 mm) | 0.46 mm | 731 mm | 35 | Too fine for most machines |
| 3 × 2 in (76 × 51 mm) | 0.69 mm | 1,096 mm | 15 | Fine detail: vinyl and paper only, weed with care |
| 4 × 2.66 in (102 × 68 mm) | 0.91 mm | 1,461 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 6 × 3.99 in (152 × 101 mm) | 1.4 mm | 2,192 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.32 in (203 × 135 mm) | 1.8 mm | 2,922 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.98 in (305 × 203 mm) | 2.7 mm | 4,383 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More It’s Not a Dad Bod It’s a Father Figure SVG files
-
It’s a Father Figure in Lilita One Solid · 32 pieces -
It’s a Father Figure in Amatic SC Solid · 31 pieces -
It’s a Father Figure in block capitals Solid · 31 pieces -
It’s a Father Figure in script and capitals Solid · 29 pieces -
It’s a Father Figure with stars Solid · 27 pieces -
It’s a Father Figure outline lettering Outline · 35 pieces -
It’s a Father Figure stencil plate Solid · one piece -
It’s a Father Figure with a drop shadow Layered · 25 pieces
← It’s a Father Figure in Pacifico All 10 It’s Not a Dad Bod It’s a Father Figure designs It’s a Father Figure in Lilita One →