I Have a Crazy Uncle stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “I’M THE LUCKY ONE I HAVE A CRAZY UNCLE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.58 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 31: 1 outer edge and 30 cut-outs |
| Cut length | 1,454 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 525 curve and line segments |
Measured from the file. PNG: 2,000 × 1,337 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.64 mm | 369 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.31 in (51 × 33 mm) | 1.3 mm | 739 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.97 in (76 × 50 mm) | 1.9 mm | 1,108 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.62 in (102 × 67 mm) | 2.5 mm | 1,477 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.93 in (152 × 100 mm) | 3.8 mm | 2,216 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.24 in (203 × 133 mm) | 5.1 mm | 2,955 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.86 in (305 × 200 mm) | 7.6 mm | 4,432 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I’m the Lucky One I Have a Crazy Uncle SVG files
-
I Have a Crazy Uncle with a drop shadow Layered · 16 pieces -
I Have a Crazy Uncle in Pacifico Solid · 12 pieces -
I Have a Crazy Uncle in Lobster Solid · 19 pieces -
I Have a Crazy Uncle in Lilita One Solid · 15 pieces -
I Have a Crazy Uncle in Amatic SC Solid · 30 pieces -
I Have a Crazy Uncle in block capitals Solid · 30 pieces -
I Have a Crazy Uncle in script and capitals Solid · 23 pieces -
I Have a Crazy Uncle with stars Solid · 25 pieces
← I Have a Crazy Uncle outline lettering All 10 I’m the Lucky One I Have a Crazy Uncle designs I Have a Crazy Uncle with a drop shadow →