I Have a Crazy Uncle with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I’m the Lucky One I Have a Crazy Uncle” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.41 in), scales to any size |
|---|---|
| Pieces | 16 separate pieces |
| Outlines to cut | 35: 16 outer edges and 19 cut-outs |
| Cut length | 1,807 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 828 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,254 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 16 mm) | 0.66 mm | 459 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.22 in (51 × 31 mm) | 1.3 mm | 918 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.84 in (76 × 47 mm) | 2 mm | 1,377 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.45 in (102 × 62 mm) | 2.6 mm | 1,836 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.67 in (152 × 93 mm) | 4 mm | 2,754 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.9 in (203 × 124 mm) | 5.3 mm | 3,672 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.34 in (305 × 187 mm) | 7.9 mm | 5,508 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I’m the Lucky One I Have a Crazy Uncle SVG files
-
I Have a Crazy Uncle with a four-leaf clover Solid · 24 pieces
-
I Have a Crazy Uncle in Pacifico Solid · 12 pieces
-
I Have a Crazy Uncle in Lobster Solid · 11 pieces
-
I Have a Crazy Uncle in Lilita One Solid · 30 pieces
-
I Have a Crazy Uncle in Amatic SC Solid · 29 pieces
-
I Have a Crazy Uncle in block capitals Solid · 30 pieces
-
I Have a Crazy Uncle in script and capitals Solid · 23 pieces
-
I Have a Crazy Uncle with stars Solid · 17 pieces
← I Have a Crazy Uncle stencil plate All 11 I’m the Lucky One I Have a Crazy Uncle designs I Have a Crazy Uncle with a four-leaf clover →