I Have a Crazy Uncle in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I’m the Lucky One I Have a Crazy Uncle” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 40 mm (3.94 × 1.59 in), scales to any size |
|---|---|
| Pieces | 30 separate pieces |
| Outlines to cut | 38: 30 outer edges and 8 cut-outs |
| Cut length | 945 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 440 curve and line segments |
Measured from the file. PNG: 2,000 × 854 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.4 in (25 × 10 mm) | 0.36 mm | 240 mm | 200 | Too fine for most machines |
| 2 × 0.81 in (51 × 21 mm) | 0.71 mm | 480 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.21 in (76 × 31 mm) | 1.1 mm | 720 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.62 in (102 × 41 mm) | 1.4 mm | 960 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.42 in (152 × 62 mm) | 2.1 mm | 1,440 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.23 in (203 × 82 mm) | 2.8 mm | 1,920 mm | 3 | Vinyl, card and thin sheet |
| 12 × 4.85 in (305 × 123 mm) | 4.3 mm | 2,880 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I’m the Lucky One I Have a Crazy Uncle SVG files
-
I Have a Crazy Uncle in Amatic SC Solid · 29 pieces
-
I Have a Crazy Uncle in block capitals Solid · 30 pieces
-
I Have a Crazy Uncle in script and capitals Solid · 23 pieces
-
I Have a Crazy Uncle with stars Solid · 17 pieces
-
I Have a Crazy Uncle outline lettering Outline · 30 pieces
-
I Have a Crazy Uncle stencil plate Solid · one piece
-
I Have a Crazy Uncle with a drop shadow Layered · 16 pieces
-
I Have a Crazy Uncle with a four-leaf clover Solid · 24 pieces
← I Have a Crazy Uncle in Lobster All 11 I’m the Lucky One I Have a Crazy Uncle designs I Have a Crazy Uncle in Amatic SC →