I Have a Crazy Uncle outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I’m the Lucky One I Have a Crazy Uncle” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.5 in), scales to any size |
|---|---|
| Pieces | 30 separate pieces |
| Outlines to cut | 60: 30 outer edges and 30 cut-outs |
| Cut length | 1,056 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 583 curve and line segments |
Measured from the file. PNG: 2,000 × 810 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | 0.25 mm | 268 mm | 210 | Too fine for most machines |
| 2 × 0.76 in (51 × 19 mm) | 0.51 mm | 536 mm | 60 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.14 in (76 × 29 mm) | 0.76 mm | 805 mm | 27 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.52 in (102 × 39 mm) | 1 mm | 1,073 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.29 in (152 × 58 mm) | 1.5 mm | 1,609 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.05 in (203 × 77 mm) | 2 mm | 2,146 mm | 3 | Vinyl, card and thin sheet |
| 12 × 4.57 in (305 × 116 mm) | 3 mm | 3,219 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I’m the Lucky One I Have a Crazy Uncle SVG files
-
I Have a Crazy Uncle stencil plate Solid · one piece
-
I Have a Crazy Uncle with a drop shadow Layered · 16 pieces
-
I Have a Crazy Uncle with a four-leaf clover Solid · 24 pieces
-
I Have a Crazy Uncle in Pacifico Solid · 12 pieces
-
I Have a Crazy Uncle in Lobster Solid · 11 pieces
-
I Have a Crazy Uncle in Lilita One Solid · 30 pieces
-
I Have a Crazy Uncle in Amatic SC Solid · 29 pieces
-
I Have a Crazy Uncle in block capitals Solid · 30 pieces
← I Have a Crazy Uncle with stars All 11 I’m the Lucky One I Have a Crazy Uncle designs I Have a Crazy Uncle stencil plate →