To the Moon and Back stencil plate SVG
A rounded plate with “I LOVE YOU TO THE MOON AND BACK” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 74 mm (3.94 × 2.91 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 25: 1 outer edge and 24 cut-outs |
| Cut length | 1,678 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 467 curve and line segments |
Measured from the file. PNG: 2,000 × 1,498 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.74 in (25 × 19 mm) | 0.43 mm | 426 mm | 120 | Too fine for most machines |
| 2 × 1.48 in (51 × 38 mm) | 0.86 mm | 852 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.22 in (76 × 56 mm) | 1.3 mm | 1,279 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.96 in (102 × 75 mm) | 1.7 mm | 1,705 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.43 in (152 × 113 mm) | 2.6 mm | 2,557 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.91 in (203 × 150 mm) | 3.5 mm | 3,410 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 8.87 in (305 × 225 mm) | 5.2 mm | 5,115 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Love You to the Moon and Back SVG files
-
To the Moon and Back with a drop shadow Layered · 17 pieces -
To the Moon and Back in Pacifico Solid · 9 pieces -
To the Moon and Back in Lobster Solid · 13 pieces -
To the Moon and Back in Kaushan Script Solid · 24 pieces -
To the Moon and Back in Lilita One Solid · 24 pieces -
To the Moon and Back in Alfa Slab One Solid · 24 pieces -
To the Moon and Back in Amatic SC Solid · 24 pieces -
To the Moon and Back in block capitals Solid · 24 pieces
← To the Moon and Back outline lettering All 12 I Love You to the Moon and Back designs To the Moon and Back with a drop shadow →