To the Moon and Back with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Love You to the Moon and Back” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.1 in), scales to any size |
|---|---|
| Pieces | 17 separate pieces |
| Outlines to cut | 40: 17 outer edges and 23 cut-outs |
| Cut length | 2,382 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 859 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,590 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.61 mm | 605 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.57 in (51 × 40 mm) | 1.2 mm | 1,210 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.36 in (76 × 60 mm) | 1.8 mm | 1,815 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.15 in (102 × 80 mm) | 2.4 mm | 2,420 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.72 in (152 × 120 mm) | 3.7 mm | 3,630 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.3 in (203 × 160 mm) | 4.9 mm | 4,840 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.44 in (305 × 240 mm) | 7.3 mm | 7,260 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Love You to the Moon and Back SVG files
-
To the Moon and Back with a crescent moon Solid · 20 pieces
-
To the Moon and Back in Pacifico Solid · 9 pieces
-
To the Moon and Back in Lobster Solid · 13 pieces
-
To the Moon and Back in Kaushan Script Solid · 24 pieces
-
To the Moon and Back in Lilita One Solid · 24 pieces
-
To the Moon and Back in Alfa Slab One Solid · 24 pieces
-
To the Moon and Back in Amatic SC Solid · 24 pieces
-
To the Moon and Back in block capitals Solid · 24 pieces
← To the Moon and Back stencil plate All 13 I Love You to the Moon and Back designs To the Moon and Back with a crescent moon →