To the Moon and Back in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Love You to the Moon and Back” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.94 in), scales to any size |
|---|---|
| Pieces | 24 separate pieces |
| Outlines to cut | 36: 24 outer edges and 12 cut-outs |
| Cut length | 1,161 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 415 curve and line segments |
Measured from the file. PNG: 2,000 × 1,025 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 13 mm) | 0.41 mm | 295 mm | 170 | Too fine for most machines |
| 2 × 0.99 in (51 × 25 mm) | 0.81 mm | 590 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.48 in (76 × 38 mm) | 1.2 mm | 885 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.97 in (102 × 50 mm) | 1.6 mm | 1,180 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.96 in (152 × 75 mm) | 2.4 mm | 1,769 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.94 in (203 × 100 mm) | 3.3 mm | 2,359 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 5.92 in (305 × 150 mm) | 4.9 mm | 3,539 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Love You to the Moon and Back SVG files
-
To the Moon and Back in Amatic SC Solid · 24 pieces
-
To the Moon and Back in block capitals Solid · 24 pieces
-
To the Moon and Back in script and capitals Solid · 19 pieces
-
To the Moon and Back with hearts Solid · 19 pieces
-
To the Moon and Back outline lettering Outline · 24 pieces
-
To the Moon and Back stencil plate Solid · one piece
-
To the Moon and Back with a drop shadow Layered · 17 pieces
-
To the Moon and Back with a crescent moon Solid · 20 pieces
← To the Moon and Back in Lilita One All 13 I Love You to the Moon and Back designs To the Moon and Back in Amatic SC →