To the Moon and Back in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Love You to the Moon and Back” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 57 mm (3.94 × 2.26 in), scales to any size |
|---|---|
| Pieces | 24 separate pieces |
| Outlines to cut | 36: 24 outer edges and 12 cut-outs |
| Cut length | 1,159 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 384 curve and line segments |
Measured from the file. PNG: 2,000 × 1,179 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.57 in (25 × 15 mm) | 0.53 mm | 294 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.15 in (51 × 29 mm) | 1.1 mm | 589 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.72 in (76 × 44 mm) | 1.6 mm | 883 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.29 in (102 × 58 mm) | 2.1 mm | 1,178 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.44 in (152 × 87 mm) | 3.2 mm | 1,766 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.58 in (203 × 116 mm) | 4.3 mm | 2,355 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.88 in (305 × 175 mm) | 6.4 mm | 3,533 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Love You to the Moon and Back SVG files
-
To the Moon and Back in Alfa Slab One Solid · 24 pieces
-
To the Moon and Back in Amatic SC Solid · 24 pieces
-
To the Moon and Back in block capitals Solid · 24 pieces
-
To the Moon and Back in script and capitals Solid · 19 pieces
-
To the Moon and Back with hearts Solid · 19 pieces
-
To the Moon and Back outline lettering Outline · 24 pieces
-
To the Moon and Back stencil plate Solid · one piece
-
To the Moon and Back with a drop shadow Layered · 17 pieces
← To the Moon and Back in Kaushan Script All 13 I Love You to the Moon and Back designs To the Moon and Back in Alfa Slab One →