Free I Don’t Give a Sip SVG

I Don’t Give a Sip in Lobster SVG

I Don’t Give a Sip in Lobster, as a solid black shape — I Don’t Give a Sip in Lobster. The preview is the SVG file itself.

“I Don’t Give a Sip” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 63 mm (3.94 × 2.47 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	17: 13 outer edges and 4 cut-outs
Cut length	1,007 mm at this size
Narrowest part	1 mm at this size
Nodes	362 curve and line segments

Measured from the file. PNG: 2,000 × 1,285 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.63 in (25 × 16 mm)	0.25 mm	256 mm	140	Too fine for most machines
2 × 1.26 in (51 × 32 mm)	0.51 mm	512 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.88 in (76 × 48 mm)	0.76 mm	767 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.51 in (102 × 64 mm)	1 mm	1,023 mm	8	Vinyl, card and thin sheet
6 × 3.77 in (152 × 96 mm)	1.5 mm	1,535 mm	3	Vinyl, card and thin sheet
8 × 5.02 in (203 × 128 mm)	2 mm	2,046 mm	2	Vinyl, card and thin sheet
12 × 7.54 in (305 × 191 mm)	3 mm	3,069 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Don’t Give a Sip SVG files

← I Don’t Give a Sip in Pacifico All 12 I Don’t Give a Sip designs I Don’t Give a Sip in Kaushan Script →