Free I Don’t Give a Sip SVG

I Don’t Give a Sip in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Don’t Give a Sip in Alfa Slab One, as a solid black shape
I Don’t Give a Sip in Alfa Slab One. The preview is the SVG file itself.

“I Don’t Give a Sip” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 42 mm (3.94 × 1.66 in), scales to any size
Pieces16 separate pieces
Outlines to cut21: 16 outer edges and 5 cut-outs
Cut length786 mm at this size
Narrowest part1.9 mm at this size
Nodes237 curve and line segments

Measured from the file. PNG: 2,000 × 887 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.42 in (25 × 11 mm)0.48 mm200 mm190Too fine for most machines
2 × 0.84 in (51 × 21 mm)0.97 mm399 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.26 in (76 × 32 mm)1.4 mm599 mm24Vinyl, card and thin sheet
4 × 1.68 in (102 × 43 mm)1.9 mm799 mm12Vinyl, card and thin sheet
6 × 2.53 in (152 × 64 mm)2.9 mm1,198 mm4Vinyl, card and thin sheet
8 × 3.37 in (203 × 86 mm)3.9 mm1,597 mm3Any material, including 3 mm wood and acrylic
12 × 5.05 in (305 × 128 mm)5.8 mm2,396 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Don’t Give a Sip SVG files

← I Don’t Give a Sip in Lilita One All 13 I Don’t Give a Sip designs I Don’t Give a Sip in Amatic SC →