I Don’t Give a Sip in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Don’t Give a Sip” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.91 in), scales to any size |
|---|---|
| Pieces | 16 separate pieces |
| Outlines to cut | 21: 16 outer edges and 5 cut-outs |
| Cut length | 783 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 240 curve and line segments |
Measured from the file. PNG: 2,000 × 1,010 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 12 mm) | 0.64 mm | 199 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.97 in (51 × 25 mm) | 1.3 mm | 398 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.45 in (76 × 37 mm) | 1.9 mm | 597 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.94 in (102 × 49 mm) | 2.5 mm | 796 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.91 in (152 × 74 mm) | 3.8 mm | 1,193 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 3.88 in (203 × 99 mm) | 5.1 mm | 1,591 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 5.82 in (305 × 148 mm) | 7.6 mm | 2,387 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Don’t Give a Sip SVG files
-
I Don’t Give a Sip in Alfa Slab One Solid · 16 pieces
-
I Don’t Give a Sip in Amatic SC Solid · 14 pieces
-
I Don’t Give a Sip in block capitals Solid · 14 pieces
-
I Don’t Give a Sip in script and capitals Solid · 13 pieces
-
I Don’t Give a Sip with stars Solid · 19 pieces
-
I Don’t Give a Sip outline lettering Outline · 18 pieces
-
I Don’t Give a Sip stencil plate Solid · one piece
-
I Don’t Give a Sip with a drop shadow Layered · 15 pieces
← I Don’t Give a Sip in Kaushan Script All 13 I Don’t Give a Sip designs I Don’t Give a Sip in Alfa Slab One →