Free I Don’t Give a Sip SVG

I Don’t Give a Sip with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

I Don’t Give a Sip with stars, as a solid black shape
I Don’t Give a Sip with stars. The preview is the SVG file itself.

“I Don’t Give a Sip” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 95 mm (3.94 × 3.74 in), scales to any size
Pieces19 separate pieces
Outlines to cut23: 19 outer edges and 4 cut-outs
Cut length1,246 mm at this size
Narrowest part1.1 mm at this size
Nodes327 curve and line segments

Measured from the file. PNG: 2,000 × 1,904 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)0.28 mm316 mm100Too fine for most machines
2 × 1.9 in (51 × 48 mm)0.56 mm633 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.85 in (76 × 72 mm)0.84 mm949 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.8 in (102 × 97 mm)1.1 mm1,266 mm6Vinyl, card and thin sheet
6 × 5.7 in (152 × 145 mm)1.7 mm1,899 mm2Vinyl, card and thin sheet
8 × 7.6 in (203 × 193 mm)2.2 mm2,532 mm1Vinyl, card and thin sheet
12 × 11.4 in (305 × 290 mm)3.4 mm3,798 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I Don’t Give a Sip SVG files

← I Don’t Give a Sip in script and capitals All 13 I Don’t Give a Sip designs I Don’t Give a Sip outline lettering →