Free Husband SVG

Husband in Amatic SC SVG

Husband in Amatic SC, as a solid black shape — Husband in Amatic SC. The preview is the SVG file itself.

“Husband” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 34 mm (3.94 × 1.33 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	11: 7 outer edges and 4 cut-outs
Cut length	924 mm at this size
Narrowest part	1.3 mm at this size
Nodes	297 curve and line segments

Measured from the file. PNG: 2,000 × 725 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	0.33 mm	235 mm	220	Too fine for most machines
2 × 0.67 in (51 × 17 mm)	0.66 mm	469 mm	65	Fine detail: vinyl and paper only, weed with care
3 × 1.01 in (76 × 26 mm)	0.99 mm	704 mm	30	Fine detail: vinyl and paper only, weed with care
4 × 1.35 in (102 × 34 mm)	1.3 mm	939 mm	14	Vinyl, card and thin sheet
6 × 2.02 in (152 × 51 mm)	2 mm	1,408 mm	5	Vinyl, card and thin sheet
8 × 2.7 in (203 × 68 mm)	2.6 mm	1,878 mm	4	Vinyl, card and thin sheet
12 × 4.04 in (305 × 103 mm)	4 mm	2,816 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Husband SVG files

← Husband in Alfa Slab One All 12 Husband designs Husband in block capitals →