Free Husband SVG

Husband stencil plate SVG

Husband stencil plate, as a solid black shape — Husband stencil plate. The preview is the SVG file itself.

A rounded plate with “HUSBAND” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 34 mm (3.94 × 1.35 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	835 mm at this size
Narrowest part	1 mm at this size
Nodes	121 curve and line segments

Measured from the file. PNG: 2,000 × 737 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.34 in (25 × 9 mm)	0.25 mm	212 mm	220	Too fine for most machines
2 × 0.69 in (51 × 17 mm)	0.51 mm	424 mm	65	Fine detail: vinyl and paper only, weed with care
3 × 1.03 in (76 × 26 mm)	0.76 mm	636 mm	27	Fine detail: vinyl and paper only, weed with care
4 × 1.37 in (102 × 35 mm)	1 mm	848 mm	14	Vinyl, card and thin sheet
6 × 2.06 in (152 × 52 mm)	1.5 mm	1,273 mm	5	Vinyl, card and thin sheet
8 × 2.74 in (203 × 70 mm)	2 mm	1,697 mm	4	Vinyl, card and thin sheet
12 × 4.12 in (305 × 105 mm)	3 mm	2,545 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Husband SVG files

← Husband outline lettering All 12 Husband designs Husband with a drop shadow →