Free Husband SVG

Husband with a star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Husband with a star. The preview is the SVG file itself.

“Husband” with a star above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	8: 4 outer edges and 4 cut-outs
Cut length	746 mm at this size
Narrowest part	1 mm at this size
Nodes	180 curve and line segments

Measured from the file. PNG: 2,000 × 1,406 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.25 mm	189 mm	130	Too fine for most machines
2 × 1.38 in (51 × 35 mm)	0.51 mm	379 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.07 in (76 × 53 mm)	0.76 mm	568 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.76 in (102 × 70 mm)	1 mm	758 mm	8	Vinyl, card and thin sheet
6 × 4.15 in (152 × 105 mm)	1.5 mm	1,137 mm	2	Vinyl, card and thin sheet
8 × 5.53 in (203 × 140 mm)	2 mm	1,516 mm	2	Vinyl, card and thin sheet
12 × 8.29 in (305 × 211 mm)	3 mm	2,274 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Husband SVG files

← Husband with a drop shadow All 13 Husband designs Husband in Pacifico →