Free Husband SVG

Husband in block capitals SVG

Husband in block capitals, as a solid black shape
Husband in block capitals. The preview is the SVG file itself.

“HUSBAND” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 26 mm (3.94 × 1.03 in), scales to any size
Pieces7 separate pieces
Outlines to cut11: 7 outer edges and 4 cut-outs
Cut length804 mm at this size
Narrowest part3.1 mm at this size
Nodes108 curve and line segments

Measured from the file. PNG: 2,000 × 579 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.26 in (25 × 7 mm)0.79 mm204 mm260Fine detail: vinyl and paper only, weed with care
2 × 0.52 in (51 × 13 mm)1.6 mm408 mm80Vinyl, card and thin sheet
3 × 0.78 in (76 × 20 mm)2.4 mm613 mm36Vinyl, card and thin sheet
4 × 1.04 in (102 × 27 mm)3.1 mm817 mm18Any material, including 3 mm wood and acrylic
6 × 1.57 in (152 × 40 mm)4.7 mm1,225 mm6Any material, including 3 mm wood and acrylic
8 × 2.09 in (203 × 53 mm)6.3 mm1,634 mm5Any material, including 3 mm wood and acrylic
12 × 3.13 in (305 × 80 mm)9.4 mm2,451 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Husband SVG files

← Husband in Amatic SC All 12 Husband designs Husband with a swash underline →