Free Hot Cocoa SVG

Hot Cocoa stencil plate SVG

Hot Cocoa stencil plate, as a solid black shape — Hot Cocoa stencil plate. The preview is the SVG file itself.

A rounded plate with “HOT COCOA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 96 mm (3.94 × 3.77 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,481 mm at this size
Narrowest part	1.5 mm at this size
Nodes	185 curve and line segments

Measured from the file. PNG: 2,000 × 1,917 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.96 in (25 × 24 mm)	0.38 mm	376 mm	100	Too fine for most machines
2 × 1.91 in (51 × 49 mm)	0.76 mm	752 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.87 in (76 × 73 mm)	1.1 mm	1,129 mm	9	Vinyl, card and thin sheet
4 × 3.83 in (102 × 97 mm)	1.5 mm	1,505 mm	6	Vinyl, card and thin sheet
6 × 5.74 in (152 × 146 mm)	2.3 mm	2,257 mm	2	Vinyl, card and thin sheet
8 × 7.66 in (203 × 194 mm)	3 mm	3,009 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.48 in (305 × 292 mm)	4.6 mm	4,514 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa SVG files

← Hot Cocoa outline lettering All 12 Hot Cocoa designs Hot Cocoa with a drop shadow →