Free Hot Cocoa SVG

Hot Cocoa outline lettering SVG

Hot Cocoa outline lettering, drawn as a line — Hot Cocoa outline lettering. The preview is the SVG file itself.

“Hot Cocoa” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.73 in), scales to any size
Pieces	12 separate pieces
Outlines to cut	24: 12 outer edges and 12 cut-outs
Cut length	1,323 mm at this size
Narrowest part	1.4 mm at this size
Nodes	278 curve and line segments

Measured from the file. PNG: 2,000 × 1,410 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.36 mm	336 mm	130	Too fine for most machines
2 × 1.39 in (51 × 35 mm)	0.71 mm	672 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.08 in (76 × 53 mm)	1.1 mm	1,008 mm	15	Vinyl, card and thin sheet
4 × 2.77 in (102 × 70 mm)	1.4 mm	1,344 mm	8	Vinyl, card and thin sheet
6 × 4.16 in (152 × 106 mm)	2.1 mm	2,016 mm	2	Vinyl, card and thin sheet
8 × 5.54 in (203 × 141 mm)	2.8 mm	2,688 mm	2	Vinyl, card and thin sheet
12 × 8.32 in (305 × 211 mm)	4.3 mm	4,033 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa SVG files

← Hot Cocoa with stars All 12 Hot Cocoa designs Hot Cocoa stencil plate →