Free Hot Cocoa SVG

Hot Cocoa with a drop shadow SVG

Hot Cocoa with a drop shadow, in layered colours
Hot Cocoa with a drop shadow. The preview is the SVG file itself.

“Hot Cocoa” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut18: 5 outer edges and 13 cut-outs
Cut length1,735 mm at this size
Narrowest part3.8 mm at this size
Nodes510 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 1,950 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.97 mm441 mm100Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (49 × 51 mm)1.9 mm881 mm25Vinyl, card and thin sheet
2.92 × 3 in (74 × 76 mm)2.9 mm1,322 mm9Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)3.9 mm1,763 mm4Any material, including 3 mm wood and acrylic
5.84 × 6 in (148 × 152 mm)5.8 mm2,644 mm2Any material, including 3 mm wood and acrylic
7.79 × 8 in (198 × 203 mm)7.7 mm3,526 mm1Any material, including 3 mm wood and acrylic
11.69 × 12 in (297 × 305 mm)12 mm5,288 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa SVG files

← Hot Cocoa stencil plate All 12 Hot Cocoa designs Hot Cocoa in Pacifico →