Free Hot Cocoa SVG

Hot Cocoa in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hot Cocoa in Alfa Slab One, as a solid black shape
Hot Cocoa in Alfa Slab One. The preview is the SVG file itself.

“Hot Cocoa” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 64 mm (3.94 × 2.51 in), scales to any size
Pieces8 separate pieces
Outlines to cut12: 8 outer edges and 4 cut-outs
Cut length777 mm at this size
Narrowest part3.1 mm at this size
Nodes139 curve and line segments

Measured from the file. PNG: 2,000 × 1,302 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.79 mm197 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.27 in (51 × 32 mm)1.6 mm395 mm40Vinyl, card and thin sheet
3 × 1.91 in (76 × 49 mm)2.4 mm592 mm15Vinyl, card and thin sheet
4 × 2.55 in (102 × 65 mm)3.1 mm789 mm8Any material, including 3 mm wood and acrylic
6 × 3.82 in (152 × 97 mm)4.7 mm1,184 mm3Any material, including 3 mm wood and acrylic
8 × 5.1 in (203 × 129 mm)6.3 mm1,579 mm2Any material, including 3 mm wood and acrylic
12 × 7.64 in (305 × 194 mm)9.4 mm2,368 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hot Cocoa SVG files

← Hot Cocoa in Lilita One All 13 Hot Cocoa designs Hot Cocoa in Amatic SC →