Free Hope SVG

Hope in Amatic SC SVG

Hope in Amatic SC, as a solid black shape — Hope in Amatic SC. The preview is the SVG file itself.

“Hope” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces	4 separate pieces
Outlines to cut	6: 4 outer edges and 2 cut-outs
Cut length	951 mm at this size
Narrowest part	2.6 mm at this size
Nodes	209 curve and line segments

Measured from the file. PNG: 2,000 × 1,408 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.66 mm	242 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.38 in (51 × 35 mm)	1.3 mm	483 mm	35	Vinyl, card and thin sheet
3 × 2.08 in (76 × 53 mm)	2 mm	725 mm	15	Vinyl, card and thin sheet
4 × 2.77 in (102 × 70 mm)	2.6 mm	966 mm	8	Vinyl, card and thin sheet
6 × 4.15 in (152 × 105 mm)	4 mm	1,449 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.54 in (203 × 141 mm)	5.3 mm	1,932 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.3 in (305 × 211 mm)	7.9 mm	2,899 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hope SVG files

← Hope in Alfa Slab One All 12 Hope designs Hope in block capitals →